New Setup fuel pressure regulator - Edelbrock Community Forum
2023年9月30日 — New Setup fuel pressure regulator. 09-30-2023, 07:36 PM. Hi Everyone. In the process of installing ProFlo4 system to a new engine build and would like some advice on the fuel pressure regulator and fuel pump setup. I've built a 353 SBC with AFR195 heads and Isky 225/234 hyd roller @ 10.25:1 (4.155 bore). I've purchased a Aeromotive phantom 340 ...
Fuel pressure regulator - Edelbrock Community Forum
Fuel pressure regulator. 04-05-2023, 02:14 PM. Where does the vacuum line from an adjustable regulator connect to on the throttle body? I have 2 big 3/8 ports front and back and the instructions say not for fuel. The other one is a 1/4 inch one on the front passenger side that my th400 vacuum hooks to. Tags: None.
Fuel pressure regulator - Edelbrock Community Forum
Tweet. #4. 06-05-2021, 08:47 AM. Originally posted by bgriff. It will be rail mounted, regulator 17401. so it goes in / on the end of fuel rail and ether side can be in or out. Last edited by fleet man; 06-05-2021, 08:51 AM . I have a return style fuel system and am using an Edelbrock Pro flo fuel pressure regulator.
Fuel Pressure Regulator Problem - Edelbrock Community Forum
2024年1月4日 — Fuel Pressure Regulator Problem. 01-04-2024, 08:21 AM. I have an 87 Chevy 1 ton 4x4 with dual fuel tanks. I have an HT502 motor in it topped with the Edelbrock 35870. It runs great with the exception of excessive pinging when I am pulling maximum power up a hil.
Vacuum for my fuel pressure regulator - Edelbrock Community …
2023年12月4日 — After you connect the fuel pressure regulator to a vacuum source, you'll just have to see how it affects cold start, idle afr, etc. A 43 psi setup theoretically should have less effect than the higher 58 psi setup. Set fuel pump pressure as per app.58. idling is 50.3 to 51 .7.
Fuel pressure regulator - Edelbrock Community Forum
2020年6月2日 — I need to get a fuel pressure regulator and need to know if i need the 17400 (43PSI) or the 17401 (58PSI). I really do not want the hassle of a remote mount adjustable one. My engine is a GMPP ZZ454 advertised 469 HP and 519 torque with cam specs of 211 Intake and 230 exhaust. I do not know how much vacuum. I see three
Fuel pressure regulator - Edelbrock Community Forum
Fuel pressure regulator. 11-18-2021, 02:04 PM. 347, pro flo installed 2 months ago. Walbro in tank fuel pump, 6 AN line, new Aeromotive FPR and gauge. When I initially installed everything and programed the settings in the ECU, the FPR was set at 58 psi without me adjusting the pressure. I finally got caught up with all of the follow up jobs on ...
Plumbing a fuel pressure regulator - Edelbrock Community Forum
07-13-2021, 11:24 AM. Ford 347 with pro flow 4 system. Purchased an Aeromotive 13129 adjustable fuel pressure regulator. According to the Pro flo 4 instructions the FP regulator should be plumbed between the fuel pump and the fuel rails with a return line to the fuel tank. According to the Aeromotive instructions it should be plumbed on the ...
Fuel pressure w/ vacuum referenced reg…. - forums.edelbrock.com
2021年11月24日 — The vacuum reference will lower fuel pressure. slightly under idle and cruise conditions. The amount of pressure reduction will vary from engine to engine. During wide open throttle. conditions, the fuel pressure should read the set point value of 43psi or 58psi depending on your application. The fuel pressure regulator.
Fuel Pressure Regulator confusion - Edelbrock Community Forum
2021年9月20日 — Fuel Pressure Regulator confusion. 09-19-2021, 08:25 PM. Hey, Swapping from a MSD Atomic system to Proflo 4. I have an Atomic 2938 fuel pressure regulator and I am struggling to find out if this is a bypass or deadhead regulator. In essence I want to plumb it per edelbrocks recommendation with the fuel rail dead headed.