GS108 switch ports don't appear to be working - Netgear
2016年4月2日 — The GS108 is only a pass-through switch (pure hardware) and is not involved in giving away IP addresses. For your setup, the router is the main source of communication on the LAN (we'll take away the GS108 as a part of the networking equipment and …
Solved: GS108 vs GS308 unmanages switches - Netgear
2020年7月25日 — The latest GS108 switch model is GS108v4 (v = version) and the latest GS308 model is GS308v3. Here below are the differences between the GS108 and GS308 switches: As reference, you may double check their specifications on the links below: GS108v4 Data Sheet . GS308v3 Data Sheet . NETGEAR Business Product Catalog Volume 20-2 (see page 33 and …
GS108 Switch Uplink Speed Drops from 1000 to 100 Mbps - Netgear
I tried a different port on the switch. Same problem. Just a note, every time I tried any of these, the uplink connection went back to gigabit for a time, then dropped down to 100 Mbps. Other gigabit devices connected to the switch and the router are working fine--it is only the link between the switch and router that slows down.
Solved: Cannot Factory Reset ProSafe GS108 - Netgear
2019年7月25日 — hello everyone, I am having a hard time resetting my ProSafe 8 ports Gigabit Switch (GS108). I can't find the reset button anywhere. I cannot find the IP address using the SmartWizard Discovery tool either. What can I do to get …
Setup a uplink port with Netgear ProSAFE GS108E
2017年1月5日 — I have purchased a Netgear ProSAFE GS108E for my soho. I have a Buffalo AP/Router/Switch in one room and I have CAT5 running into my office, about 200 feet in length. I want to change one of the ports to an uplink port and then from there, the switch can connect other devices, such as a NAS, Network Printer and Computers.
Solved: GS108 vs. GS208 vs. GS608 - NETGEAR Communities
2016年2月22日 — The GS108 is the copper gigabit version with metal casing, this is a part of the unmanaged PROSAFE switch series designed for business and is able to withstand business environments. The GS608 is the first one to be released as a SOHO type of environment compared to the first GS108 it is using only a plastic casing and there are some changes ...
JGS524E and GS108 End of Life/End of Support - Netgear
2020年1月22日 — Solved: We are an IT service provider and need to validate the end of life / end of support dates for two Netgear switch models: JGS524E and GS108. × Our systems are undergoing planned maintenance on Tuesday February 27, …
Solved: GS108PEv2 Power Failure - NETGEAR Communities
2020年10月18日 — I have heard a second click besides the RJ45 clicking in from within the switch and the power has shutdown. I verified, the power supply itself is good, showing 48V DC output. However, the switch doesn't show any power on it when plugged-in. Plugging in uplink to Port-1 didn't seem wrong - it came from port-5 of another GS108, has no PoE on it.
Daisy chain gs108 and 1Gbps not working - Netgear
2020年4月29日 — The PC/NAS/etc. connected to the second switch of the chain have two leds on ( the port is working at 1Gbps). Obviously I guess, the connection between the two switches is a bottleneck. I run some test on the ethernet port in the wall and the cable I used.
GS108 Cat6 Ethernet does not connect - Netgear
2022年8月10日 — the GS108 is a simple unmanaged switch. Usually they either work, or they don't. There isn't much "kind of works" in between because they're not doing any traffic managing or anything like that. What I usually recommend is simplifying. Take out that "long run" and just go eero--->short 6ft good cable---->switch---->short 6ft good cable----->pc ...