What are step climbs for and how to do it? - AVSIM
Posted December 4, 2015. Hi Aaron, A step climb is simply a way of keeping the aircraft at (or near) the optimum altitude at any given moment in the flight. The optimum (i.e. most fuel-efficient) altitude is a function primarily of aircraft weight, so if you're on a long-haul flight with lots of fuel on board then at the start your optimum may ...
Step Climb - PMDG 737NGX | 737NGXu - The AVSIM Community
Posted April 6, 2012. In the top right of your cruise page there is a 'step to' line. Enter what altitude you want to step to and the FMC will tell you when it is optimal to climb to that altitude. When it's time put the step climb altitude into your cruise altitude and set your MCP altitude to the next altitude and you should start climbing.
How to proceed step climbs with 777´s? - PMDG 777 - AVSIM
Posted October 21, 2013. On 10/21/2013 at 1:52 PM, Avantime said: If either auto cruise or auto step climb is NOT enabled, the 777 will NOT do a step climb on its own. the FMC will ask you to move the autopilot MCP altitude knob to the new step climb altitude. If auto cruise and auto step climb are enabled, the 777 WILL climb on its own based ...
Step Climb? - Pilot2ATC Users Forum - The AVSIM Community
Posted September 5, 2017. On 9/4/2017 at 3:33 PM, KevinMM said: If I set my flight plan at the first step then when I climb ATC tells me to descend. If I set it for the top and level off ATC tells me to expedite my climb! In this case you only need to send a "request higher" to ATC after the initial step, and other steps.
Auto Step Climb, if you use it, how do you configure it?
On 10/20/2014 at 7:25 AM, 787WannabePilot said: The altitude setting on the MCP is either at or higher than the step required. You do not need to set the altitude any higher than the initial cruise. When a step climb starts the plane automatically increases the altitude. Step climbs only occur every three to for hours.
Step climbs and RVSM definition - PMDG 777 - AVSIM
2016年1月17日 · 2.1k. Location:France. Donor. Posted January 17, 2016. Hi, 1) Step climb: To perform a step climb with the T7, you have to set the new altitude on the MCP, wait for the indication "Now" and then press the Alt intervene button on the MCP. The AP will then switch to VNAV SPD and THR REF and climb to the new altitude.
777 Auto Step Climb - PMDG 777 - The AVSIM Community
2018年11月7日 · The auto step climb should be working with manually entered step climbs, unless there is an issue with buffet margins or other safety considerations. Nothing changed the auto step climb feature in the last update. Need more specifics if you want to go down this specific case any deeper. Lots of specifics. Dan Downs KCRP.
777 Step Climbs - PMDG 777 - The AVSIM Community
Posted September 27, 2017. The FMC will always calculate the step climbs based on the step size and the aircraft weight up to the highest level possible for the duration of the flight no matter what manual step you enter in that's correct. And this is true for both the T7 and the 744.
Qualitywings B787 How to do step climbs? - AVSIM
2020年4月14日 · Once you do all these steps (the 3), Set the MCP for ur initial cruise altitude. The aircraft will do the rest. The only time there is an issue with this, is if its a VERY long flight, and ur a/c is loaded with fuel. The auto step climb will not climb past the MAX operating alt, listed on the CRZ page of the FMC.
Step Climbs, Opt and Max FL - PMDG MD-11 (Legacy Version)
2012年11月22日 · Whenever you are done with the preflight and done setting up the fmc, look at the INIT page and note the optimum altitude. Start your initial cruise altitude with that one unless you have restrictions, and set up step climbs for every 2000 feet. So if it says the optimum is 335, then start with 340 (or 330 depending on direction of flight), and ...